This is a pump for liquids who work without any mechanical parts and have a
high efficiency. The pump consist of a vertical iron construction. At the
bottom is the inlet tube. Higher up on the pump is the outlet tube. Over this
tube are there a barrier of non electrical conducting material,who let through
modulated energy of energyplain 2. Over this barrier are the coils for
magnetic injection. Those coils are placed in a ring structure. Over this ring
is the modulator tube placed. This tube are filled with thin A gas. The
modulator tube is supplied with a frequencypicture who has a amplitude at
100000 Volt on the internal electrodes in the tube. The magnetic injection
coils are supplied with another frequencypicture who has and amplitude at 1000
Ampere. The combination of the magnetic and electric injection types make the
liquid get a negative gravity. The liquid is therefore pressed upwards inside
the iron construction. The frequency picture cause the liquid mass to increase
with a factor of 100 to 1000 times in negative direction. This means that
this pump has a dramatic higher capacity than a mechanical pump. The
energyplain 2 source can be the described power tower. The use of this type of
pump needs not so much electrical power as a mechanical pump. This means that
the capacity of the electrical powerstation can be lower than for a comparable
mechanical pump. If the power tower is used it gets its energy from ITM.
